The following options can used be to activate, view and configure Dynon SkyView connectivity.
- Enable Dynon Connection – When selected the app will start to listen for active Dynon SkyView devices on the current Wi-Fi network.
- Use Dynon AS GPS Source – The app will take its GPS information from the connected Dynon SkyView instead of the internal iPad location services. If you have a cellular iPad the devices internal GPS can then serve as a backup GPS if required.
- Use Dynon AS AHRS Source – The app will take Roll, Pitch and Yaw information from the connected Dynon SkyView. When the AvPlan Synthetic Vision (SV) component is activated the AHRS information coming from the Dynon will be used to drive the SV display.
- Flight Plan Download Available – Although not configurable, a value of YES for this option indicates that the Dynon SkyView can receive flight plans from AvPlan-EFB. Flight plans can be sent to the attached Dynon SkyView via the flight plan share option.
The other information displayed is handy if you need to known the model of the attached Dynon SkyView device or its firmware level.